Windsock Installation

Instructions

Roc Tan windsocks are easily assembled and for ready use. We make your windsock using experience as pleasant as possible by making our products with highest quality materials available. Without an overwhelming amount of parts, windsock installation is simple! All our products include instructions.

5″ Windsock and Swivel Hoop

Complete unit includes:

  • 1 Sock c/w Hoop
  • 2 Nylon Washers
  • 1 Push Nut

Replacement Socks are sold separately.

Two 5/16″ hex nuts need to be welded (six inches apart) to the top of your pole. The stem of the hoop will swivel in these components.

Assembly Instructions and Mounting Suggestions:

  1. Thread Sock Through Ring And Spring Hoop Closed.
  2. Place one nylon washer on top of 5/16″ welded nut (on top of pole)
  3. Install hoop stem through above washer and down through both 5/16″ nuts.
  4. Install nylon washer and push nut on bottom of stem.
5 inch sock diagram

8″ Windsock w/ Hoop & Base

Complete unit includes:

  • 1 Preloaded Hoop
  • 1 Base which fits over 1″ dia. pipe on top of your pole.
  • 1 Sock w/ grommets & tyes

Replacement Socks are sold separately.

Assembly Instructions:

  1. Pull sock over preload section and ensure reinforcing pad is positioned above preload ring.
  2. Snug tyes around main ring of hoop and through the sock grommets.
Eight inch hoop and base

10, 12 and 18″ Windsock w/ Hoop & Base

Complete unit includes:

  • 1 Hoop ( 10, 12 or 18″)
  • 1 Preload rod (10, 12 & 18″)
  • 1 Preload support (18″ only)
  • 1 Base which fits over 1″ dia. pipe on top of your pole.
  • 1 Sock w/ grommets & ties

Replacement Socks are sold separately.

Assembly Instructions:

  1. Install the preload rod and preload support (18” only) on hoop.
  2. Pull sock over preload section and ensure reinforcing pad is positioned above preload extension.
  3. Snug ties around main ring of hoop and through the sock grommets.
10 12 and 18 inch windsock and base

24 and 36″ Windsock and Swivel Unit

Complete unit includes:

  • 1 hoop and swivel assembly
  • 1 Preload rod
  • 1 Preload support
  • 1 Sock w/ grommets & ties

Replacement Socks are sold separately.

Assembly Instructions:

  1. Install the preload rod and preload support (18” only) on hoop.
  2. Pull sock over preload section and ensure reinforcing pad is positioned above preload extension.
  3. Snug ties around main ring of hoop and through the sock grommets.
24 and 36 inch hoop and swivel

24 and 36″ Windsock with Lite Swivel Unit

Complete unit includes:

  • 1 hoop and swivel assembly c/w LED 100 to 277v light. This light is completely sealed from the weather conditions, IP65; CCT 5000K; lm 6000; Lifespan 50,000 hours; Body material Al alloy; power 50W; light rotates with windsock.
  • 1 Preload rod
  • 1 Preload support
  • 1 Sock w/ grommets & UV inhibited ties

Replacement Socks are sold separately.

Assembly Instructions:

  1. Install the preload rod and preload support on hoop.
  2. Pull sock over preload section and ensure reinforcing pad is positioned above preload extension.
  3. Snug ties around main ring of hoop and through the sock grommets.
24 and 36 inch swivel unit with L.E.D. lights

Roc Tan will repair or replace at our option any item defective in materials or workmanship within 6 months from the date of purchase.